Surface control


Under construction

Wet Roof Leak Detector WR10

The Buckleys Wet Roof Leak Detector Kit has been specially designed to find leaks in flat roofs. The equipment is suitable for use on hot melt, asphalt and single ply roofing membranes providing the surface is sufficiently soaked.

The system incorporates a pulse generator together with a receiver/detector unit, earth leads and connecting leads. Two test probes (poles) are supplied, each in three sections, which can be put together easily on site. Also included is a reel carrying 200 metres of stainless steel wire. The kit contains all of the items required to carry out the testing process.    

  • Easy to set up and use
  • Lightweight
  • Membrane keypad operation
  • Microprocessor controlled instrument
  • Selectable audible alarm
  • Clear LCD displays
  • Auto shutdown
  • One year 'back-to-base' warranty
  • Fully CE compliant

Have a look at the demonstration video


PD30R Roofing / Bridge Deck Test Kit -

The Buckleys PD130 Roofing/Bridge Deck Test Kit has been specifically created to enable inspectors to quickly effectively check a roof or Bridge Deck for pinholes and porosity.

The PD130 will test non-conductive membranes from 16 microns to 14,4 mm. The kit contains all the equipment needed to perform the tests and includes a 50 m earth extension lead and a 450 mm (18") phosphor bronze electrode, suitable for most applications.

For ease of transporting, especially on site, the Test Kit is supplied in a high visibility carrying case which securely holds the unit and all of the accessories. Batteries can be charged out of the unit by mains or from a car lighter socket or good quality D cells can be used.

PD130 unit with battery charger and 4 rechargeable batteries, power pack, shoulder bag, test probe handle, coiled interconnecting lead, 5 m earth lead, 50 m earth extension lead, 2 x 460 mm extension rods, electrode shoe, screwdriver, 450 mm phosphor bronze brush electrode, drum brush electrode, pointed probe and test voltage calculator. All contained in a high visibility robust carrying case. A calibration certificate is included in the comprehensive instruction manual.


  • Lightweight and portable
  • Easy to use
  • Audible and visual alarm fault indicators
  • Clear LCD with backlight
  • Membrane keypad operation
  • Microprocessor controlled
  • Automatic voltage selector (test voltage is set from coating thickness value)
  • Accurate sensitivity control
  • Displays electrode DC current
  • Volume control for quiet environments
  • Power limited to avoid coating damage
  • Existing PHD accessories can be used
  • One year 'back-to-base' warranty
  • CE approved